Rim lacquers / car paints in brand quality

What should be considered when using automotive paints and rim lacquers?

Car paints are there to touch up damaged areas or make desired changes to the look of the car. They are available as 1- or 2-component variants. In our store you will find car paints as a ready mixture directly from the spray bottle. Thus, the paint preparation is significantly simplified and no additional hardener must be added.

When painting with an automotive paint, note the following important points:

Preparation: Prepare your vehicle thoroughly for the paint preparation, as this step significantly affects the final result! Wash your car or the area to be prepared with products that do not contain wax, otherwise this will lead to adhesion problems of the car paint. Additionally, remove possible wax and oil residues with a silicone remover and derust the area to be painted with a deruster, if necessary.
Sanding: Before applying the new car paint, the old paint must be sanded.
Masking: Clean masking is a basic requirement for optimum painting results. Be thorough here, too! Use masking tape, for example.
Priming: Before the car paint is applied, a primer must be sprayed on and then dried through. This gives the car paint the best adhesion.
Painting: Now we come to the actual part, the application of the car paint. Feel free to spray several coats to achieve full coverage and allow the varnish to dry out according to the package instructions.
Sealing: Use a clear coat to seal the new paint layer. This makes the painted area more durable and resistant to washing.

Depending on the condition and color of the substrate, 500 ml is sufficient for around 1.6 m² for paint preparation. When painting rims with a rim lacquer, proceed in exactly the same way. Here it is particularly important to free the rims from all residues of brake dust, tar residues and road dirt in order to achieve optimum results. For this purpose, we also have the appropriate rim cleaners in our range. Both aluminum rims and steel rims can be cleaned without any problems.
Rim lacquers are in contrast to car paints due to their special composition to be more resistant, for example, to road salt and stone chips. Therefore, do not use a car paint to paint rims. Also, larger damages should not be repaired with a car paint or rim lacquer. Search for this best a professional Paint shop for a paint preparation on. An alternative to car paints and rim varnishes are spray films, which can also be used to paint rims. However, these products are not suitable for repairing your paint.

In our store you will find car paints and rim varnishes from the brand MOTRIP DULI. These products are characterized by a very good coverage and are fast drying. In addition, they have an excellent adhesion, are weatherproof and have a very high surface hardness with simultaneous elasticity. Our selection ranges from single bottles in black or gray, matte or glossy, to entire sets of bottles for a large painting effort.

After a paint reconditioning you do not have to worry that the paint can be worn off by rain or dirt. The car paints and rim lacquers that we offer in the store are weather resistant, can be polished and even survive a car wash cleaning.

Top Brands

The brand manufacturers at a glance

Car paints and rim lacquers - The universal solution for paint preparation

What should be considered when using automotive paints and rim lacquers?